Dusk Network Staking: A Walk-Through Guide

A step-by-step guide to staking DUSK

Why stake on Dusk Network?

Staking is a vital mechanic within Dusk Network. On the technical side, the act of staking powers the Segregated Byzantine Agreement (SBA), Dusk Network’s very own Consensus Algorithm. By staking, participants show their dedication and willingness to further support Dusk Network. During the ERC-20 stage, minimal technical knowledge is required.

Here’s why you should start staking today:

  • Be part of the community that is Dusk Network
  • Be an early adopter of cutting edge technology
  • And start to earn competitive rewards

Our step-by-step tutorials will detail the actions needed to participate, ensuring wide accessibility to non-technically savvy users.

Important information!

The Provisioner pre-staking contract address is


Staking Update January 12th 2021, 9:00 UTC - Block Generator Staking has been merged into Provisioner Staking. Old Block Generator contract address is


I. Requirements for Staking

Before moving along with the staking process make sure you have all prerequisites necessary for Dusk Network Provisioner Staking, and thus hold the following in your wallet:

  • Between 10.000 and 1.000.000 ERC-20 DUSK tokens
  • Some Ethereum (ETH) to pay gas fees

If you are holding your tokens on an exchange, make sure to withdraw the ERC-20 variant of DUSK into your personal wallet.

➡ Are you using the Brave Browser? Make sure to check step 3.3 for troubleshooting.
➡ Want to connect your Ledger or Trezor Device to MetaMask, make sure to check step VIII.

II. Adding the MetaMask extension to your Browser

Note: if you already have MetaMask installed you can skip this step and move to part III.

MetaMask is trusted by over 1 million users worldwide, and can be used to start exploring blockchain applications in seconds.

In order to install MetaMask, visit the official MetaMask website. Or access the MetaMask download page directly and follow these steps:

  1. Select Chrome and install Metamask for your browser.
  2. Click the “Add to Chrome” button in the top right corner.
  3. Click “Add extension” in the pop-up screen.
  4. Click “Get started” on the MetaMask welcome screen.
  5. Select your preferred option: “Import Wallet” or “Create a Wallet”.

III. Connect your Staking wallet with the Dusk Network Dashboard

Step 1. Visit the website staking.dusk.network.

Step 2. Agree to the terms and conditions and click “Stake DUSK”.


Step 3. Click the button “Connect with MetaMask”.


Note: if this button does not appear, please revert to Part II and install the MetaMask extension.

Step 3.1 Add Token

Click ‘Add Token’, and select ‘Custom Token’ in the next interface. Enter the contract address: 0x940a2db1b7008b6c776d4faaca729d6d4a4aa551

Then enter the token name ‘DUSK’ and 18 decimals (this should load automatically). Click accept to continue.

guide-img-9_Stake metamask wallet

Step 3.2 Check if your MetaMask account is connected to the website.

guide-img-10_Stake metamask wallet 2

Click the triple dot to access the settings, go to ‘connected sites’ and click ‘manually connect to current website’.

Step 3.3 Using the Brave Browser?

Running into problems connecting with Brave? Brave’s native Crypto Wallets interfere with the MetaMask connection. Head over to the settings button on the top right of your browser. Then select ‘settings’. Scroll down to the ‘Extensions’-overview, and look for ‘Web3 provider for using Dapps’, select ‘MetaMask’. Once it’s done, refresh (CTRL+SHIFT+R for a hard refresh) the page and try again.

Step 4. Follow the instructions in the MetaMask Notification.

[1/2] Select the wallet address that holds your DUSK from the list and click “Next”.

[2/2] “Confirm” that your personal Dusk Staking Dashboard will show your wallet address.

Step 5. Now you have access to your personal Dusk Staking Dashboard.

IV. Rewards and Withdrawals

It is not possible to initiate withdrawals during the initial 30-day lock-up period. After this period your dashboard shows two actions you can choose from.

  1. "Unlock Rewards". This button can be used to start collecting your accumulated rewards. Pushing this button and completing the MetaMask transaction initiates the 7-day cool-down period. After the cool-down period you are able to claim your accumulated rewards. Keep in mind, this action comes with transaction fees on the Ethereum network.

  2. "Claim Stake + Rewards". This button can be used for unstaking, by which you automatically claim your initial stake + all accumulated rewards. Only use this button if you wish to stop staking, and clicking it will initiate the 7-day cool-down period. After the cool-down period you are able to (re)claim your stake and rewards.

For the latest updates regarding staking participants please resort to official Dusk Network announcements or the staking.dusk.network website.

VI. Start Provisioner Staking

Step 1. Click on the “Stake Dusk” button.

Step 2. Enter the amount of DUSK you would like to stake, anywhere in between the range of 10,000 and 1,000,000 DUSK. Make sure that enough ERC-20 DUSK is present on your staking address. Tick all the boxes for Provisioner Staking and click “Send Stake”. The amount staked and the reward address are set and cannot be changed. Please read the following statements carefully before commencing to “Send Stake”.

  • I acknowledge that the DUSK staked and rewarded can only be withdrawn to this address.
  • I understand that I am solely responsible for safekeeping my Private Key and that without it I can not recover my DUSK.
  • I am aware that there is a 30-day lock-up period for staked DUSK and rewards. After this period, withdrawals are enabled. Any initiated withdrawal can be claimed after a 7 (seven) day cool-down period.


There is a small chance that you receive this error message with a sufficient amount of Dusk on your balance. This is because there could be a delay in the transaction to be authorized on the network. If that is the case, refreshing the page should solve the issue.


Step 3. “Confirm” MetaMask Notification to Send Stake.

By granting this permission, you’re sending your stake to the Staking Contract. Please exercise patience as it could take some time before the transaction comes through. Also, please do NOT refresh the page or leave the MetaMask Notification before the transaction is finalized.

A transaction fee is required.

Step 4. You are now a Provisioner!

Congratulations! You are now officially a Provisioner for Dusk Network.


VII. Optional: Connecting Ledger to MetaMask

In order to connect your ledger to MetaMask you can follow the official MetaMask guide.